Home > LiFePO4 Battery Pack >

7592250 Lifepo4 Battery Pack

Product Categories

Shenzhen Ryder Electronics Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

7592250 Lifepo4 Battery Pack

Name: 7592250 Lifepo4 Battery Pack
Brand: RYDBATT
Price: 1 USD

China 7592250 Lifepo4 Battery Pack wholesale

Brand Name : RYDBATT

Model Number : RYD-Lifepo4 Battery-6s1p/90986248

Certification : CE ROSH UN38.3 MSDS

Place of Origin : CHINA, guangdong

MOQ : 1000

Price : Negotiated The Price

Payment Terms : D/P, T/T,

Supply Ability : 500PCS /Day

Delivery Time : 30-45 work days

Packaging Details : Customer requirements

Type : li fe po4 batteries

Cycle life : ≥1500times

Capacity : 17.5Ah or customized

Voltage : 19.2V

Oem : Availiable,Acceptable,Accept OEM and ODM

Contact Now

LFP-7592250-15S1P-48V 19Ah-PCM

Introduction

Battery specification: 18650 / 3.7V /5.2Ah
Nominal voltage: 48V
Nominal capacity: 19Ah
Charging voltage: 51.75V
Termination voltage: 37.5V
Charging temperature: 10~45℃
Discharge temperature: -20~50℃
Storage temperature: -20~40℃
Lithium-ion battery protection: short circuit protection, overcharge protection, over discharge protection, over current protection, temperature protection, etc.
Application areas: lithium iron phosphate batteries for electric motorcycles.

Product Specification

content	Testing method	Remark
Charge cut-off voltage	51.75V
Discharge cut-off voltage	37.5V
Standard charge	Under the condition of the ambient temperature of 25 ± 2 ℃ , Charge the battery at constant current of 0.2C to reach 21.9V. Then charge the battery at constant 21.9V voltage until the charging current decreasing to 0.02C.
Standard discharge	After the standard charging , rest for 1 hour then discharge to 15V@0.2C.
Rated capacity	Typical capacity:5.2Ah	standard discharge after standard charge
Operation temperature range	:10~45℃	60±25%R.H
Operation temperature range	:-20~60℃	60±25%R.H
Storage temperature	≤1 month: -20 ~ 45℃	60±25%R.H Best 10~25℃ for long-time storage
	≤3 months: -10 ~ 30℃
	≤1 year: 0 ~ 30℃
Impedance	/
Weight	Approx:≈1.5Kg

7592250 Lifepo4 Battery Pack

Product Electric Performance Test

No.	Items	Test Conditions	Requirements
1	Capacity retention	Fully charging, store them at (20±5)℃ for 28 days, then discharge to 12V @0.2C.(the residual capacity is above 85% of nominal capacity)	Discharging time4.25h
2	Cycle Life @25℃	Discharge to 15V @0.2C, then Charge the battery @0.2C to reach 21.9V. Then charge the battery at constant 21.9V voltage until the charging current decreasing to 0.02C. Rest for 10 min. discharge to 15V@ 0.2C and rest for 10 min. Continue the charge/discharge cycles until discharge capacity lower than 80% of rated capacity.	Cycles life ≥1500
3	storage	Charge the battery to 40%~65% of its rated capacity using standard charging mode, then keep it in an 20℃±5℃, humidity 45% ～ 85% room for 12 months, fully charge and discharge it @0.2C until voltage down to 12V. (The testing sample should be within 3 months dated from production date)	Discharge time≥4h

Mechanical Performance

No.	content	Testing method	Requirements
1	Vibration Test	After standard charging, put battery on the vibration table. 30 min experiment from X, Y, Z axis. Scan rate: 1oct/min; Frequency 10- 30Hz, Swing 0.38mm; Frequency 30-55Hz, Swing 0.19mm.	No influence to batteries' electrical performance and appearance.
2	Drop Test	Random drop the battery from 1.0m height onto wood board 6 times.	No explosion or fire

PCM layout

TBD

Item	Content	Criterion
Over charge Protection	Over charge detection voltage	3.500±0.15V
	Detection delay time	1.2±0.2S
	Over charge release voltage	3.800±0.050V
Over discharge protection	Over discharge detection voltage	2.000±0.050V
	Detection delay time	144±29mS
	Over discharge release voltage	2.300±0.100V
	Rated operational current	≤5A
Over current protection	Over current detection current	6-15A
	Release condition	Cut load
	Detection delay time	9±2mS
Short protection	Detection condition	Exterior short circuit
Short protection	Release condition	Cut short circuit
Balanced	Balanced open voltage	/
	Balanced release voltage	/
	Balanced current	/
Temperature protection	Operation temperature	/
Temperature protection	Recovery temperature	/
Current consumption	Current consume in normal operation	≤70.0μA
NTC	/	/
PCB Dimension(LWH)	PCM-F19.2V 6/15A-NS

About company:

* Ryder has 15 years experience of battery packs. Our customers are from all over the world.
* Develop products according to customer requirements or product orientation.
* The automated battery assembly line can process 7K-10K cells every day to guarantee fast delivery for the orders.
* Offer 200 test points for the battery within 60V 10A and 32 test points for the battery within 100V 20A.
* SAP & MES dual system to coordinate daily production.

Delivery Time:

- Material Preparation Time: 7-15 days (or inventory)
- Production & Assembly Time 3-10 days
- Testing & Packaging Time: 2-10 days
- Total Delivery Time: 30-45days
- The faster delivery could be negotiable.

Factory photo:

7592250 Lifepo4 Battery Pack
Contact with our sales team for your OEM and ODM order.

OEM/ODM Service:
If you want to display your own brand logo in products, bags, labels or anywhere. Or you need to develop battery packs according to your product orientation. Our OEM and ODM services are ready to do it.

Packing:
According to Stardard Export Packing.
Carton box, wooden box, wooden pallet

Ryder Electronics established in Shenzhen on July 18, 2005, mainly in the business of battery packs. In 2009 the company passed ISO9001 and improved the product quality standard to fulfill the high-end requirements from our customers.

In 2012, Ryder Electronics moved to a new facility and expend the production capacity, the Productivity improved nearly 10 times than before.

In 2013, Ryder Electronics imported ERP (SAP) system to supervise order execution process.

In 2017, Ryder Electronics expanded the SMT, imported high-speed patch machine from Germany.

Until now the factory grows into a modern enterprise which integrated injection molding, PCB designing, SMT and battery pack assembling services.

In 2018 the company passed ISO14001certification, introduced automated battery production line to further improve the production quality and capacity.

Product Tags: